AnguoGuide rail type cargo elevatorWhat is the performance category

Overflow valve: it can achieve the effect of blocking the passage of the oil pipeline and diverting the flow. It is often used if the oil pipe bursts， resulting in sharp decline of equipment and severe loss.

8It is strictly forbidden to use a safety rope by two persons at the same time.

fAnguoLarge logistics warehousing equipment service company with guaranteed price and guaranteed service. Since the fixed elevator is a mechanical equipment， the quality and performance of the product are good. Do not accept the temptation of some manufacturers to buy products with substandard quality， so as to avoid some potential safety hazards in use.

Carefully prepare the special construction scheme for installation and carry out technical disclosure to the installation personnel.

JAnsfeldenWith the development of social science and technology， aluminum alloy elevators are used more and more widely. Hydraulic lifting machinery is indispensable to architecture， civil engineering and peoples daily life. Many businesses seize this opportunity to invest in and build factories. Lifting machinery companies are standing like bamboo shoots in major industrial cities，Electric lifting table but the lifting machinery industry is still hot and in short supply，UlanhotGuide rail lifting cargo elevatorWhat are the design principles of as can be seen from the side， Now the rapid development of society has driven the development of the entire industry and peoples needs. However， as a buyer， how to choose a good lifting machine has become an important topic today.

RoSome office buildings and hospitals may need several or even dozens of passenger lifts. In order to increase the speed efficiency and area of the electric lift， most high-rise buildings will divide the electric lift into an array， each group is responsible for some floors， and make different adjustments and scheduling according to the use mode of different floors at different times.

There are three movable plates on both sides of the adjusting plate， which can effectively avoid injuring the toes of the operator when the adjusting plate falls， so as to ensure the safety of the equipment.

It is easy to cause the deterioration of lubricating oil in the process of wading. Especially in the steering，Electric lifting table transmission and other systems the site should be disassembled and inspected. When the elevator is flooded， everyone should pay attention to it. The above points should not be ignored.

fFeatures of hydraulic lift: the hydraulic lifting platform products are divided into the curved arm hydraulic lifting machine， the scissors hydraulic lifting machine， the mast hydraulic lift， and the straight arm hydraulic lift according to the working mode. Hydraulic lift is the replacement of folding arm lift (lifting platform) and scissor lift (lifting platform). It can be widely used in the decoration and decoration of stations， docks， airports， hotels， posts and telecommunications， municipal gardens，Electric lifting table garages cleaning companies， public building facades，UlanhotGuide rail lifting cargo elevatorWhat are the design principles of or the installation and maintenance of power systems. The elevator has the advantages of light weight， self-propelled walking， electric starting， self-supporting legs， simple operation， large working area， especially the ability to work at height across obstacles， etc.

MThe production size of the support rod of the hydraulic lifting platform is inconsistent，Cargo elevator_ Electric elevator_ Electric lifting table_ Lifting equipment_ Lift equipment_ Aluminum alloy elevator - cargo elevator factory which belongs to the quality defect of the lifting platform equipment itself. It is recommended to contact the manufacturer for replacement， safety device， buffer spring etc. before use. Ensure a safe use environment.

jOIn fact， we should pay attention to some details， as follows: it is difficult to drive them into the shaft pin when installing the bearing excessively. But sometimes， some people think of using a hammer to hammer the bearing to facilitate the installation， and use brute force when installing the bearing. In fact， directly hitting the bearing with a hammer causes great damage to the bearing， which is the main reason for causing bearing damage and reducing the service life of the bearing. So we must not go too far when installing bearings. Before doing good， put some soft cloth or cardboard on them， and then install them.

Talking about the daily maintenance and use of the motor of the hydraulic lifting platform. Overload is strictly prohibited. Overload will increase the burden of the motor and cause the motor to burn out in serious cases.

The elevator is now very popular and can easily deliver goods to high buildings. Among them， the hydraulic elevator is more popular with people， and people can choose the suitable one according to their actual situation. However， pay attention to the lifting speed of the hydraulic lift when working at ordinary times， and do not make mistakes. What factors will affect the lifting speed of hydraulic lift?

Where is itgOverview of the development of scissor-type aerial work platform: The use of aerial work platform originated in North America in the s， branch construction， etc. in North American farms.

OThe configuration of the power unit of the power unit is the key factor affecting the lifting speed. Generally， the higher the power of the power distribution unit， and vice versa; The solenoid valve of the hydraulic lifting platform of the solenoid valve can be adjusted. Increase or decrease the hydraulic oil flow of the cylinder， and adjust the solenoid valve properly， which can also affect the lifting speed.

Reset the brake; Install the service section. The maintenance section is generally installed in Section IV.

xAnguoImproper use of lubricating oil: poor lubrication and maintenance of aerial work platform equipment such as mobile elevator will also cause small fitting clearance of parts and components， and the lubricating oil is not easy to form uniform oil film on the friction surface. In addition， due to assembly and other reasons， it is difficult to ensure the uniformity of fitting clearance， thus reducing the lubricating efficiency and causing early abnormal wear of equipment parts; In serious cases， the friction surface will be scratched or occluded， resulting in the occurrence of abnormal noise of the equipment.

mTThe main structure and use of the guideway elevator are closed gear transmission. The big and small gears are made of steel， which are soft tooth surface after quenching and tempering treatment. Because the common failure form of the closed soft tooth surface gear transmission is tooth surface pitting， the design is calculated according to the contact fatigue strength of the tooth surface and checked according to the bending fatigue strength of the tooth root. The support bracket is used to fix and support all the mechanical parts and some electrical components inside the lifting case. It is mainly welded from the side plates， connecting tubes， connecting pieces and other parts. The materials are all selected. The thickness of the side plates， products， and tens of millions of products can be selected by you. The trade safety of the professional sales elevator factory is guaranteed. At the same time， in order to reduce the weight of the support many process holes are designed on the side plates. The worm gear and worm mechanism has the advantages of large transmission ratio， compact structure， small impact load， stable transmission and low noise， and has the characteristics of reverse self-locking. It can ensure that the transmission mechanism can lock itself when the motor is powered off during the handling of patients， so the worm gear reducer is selected. The involute worm is made of steel， and its spiral surface is quenched to improve transmission efficiency and wear resistance. The worm gear is made of polyformaldehyde. Plastic worm gear has the advantages of good processing economy， vibration absorption and noise reduction， light weight， wear resistance and self-lubrication， which makes the design of elevator more humanized.

In recent years， there are no more than three factors that lead to the occurrence of domestic elevator accidents in mobile elevator manufacturers. They are human operation errors， which are purely caused by the lack of relevant equipment operators. The second is the simple hoist that has been screened in China and is not allowed to be used. This kind of hoist is potentially dangerous. And because the country has banned the production of this kind of simple hoist， the existing equipment is often aging， leading to severe social security incidents.